Electronics Line 3208GLD Uživatelský manuál stáhnout pdf (Strana 32)

ADDRESSES 198 - 201: COMMUNICATION PROTOCOLS

Each of the four telephone numbers is associated with a telephone communication protocol

programmable at these addresses. These can be defined according to the protocol used in

communications with the central station and whether the message sent will be from either the zone or

event oriented event code tables. Telephone #4 is usually associated with the “follow-me” feature, as it is

the lowest priority telephone number and can be modified by the user.

Protocol Formats.

First digit value:

5 - Follow Me 8 – Scantronics

6 - SIA 110 baud A - Contact ID

7 - SIA 300 baud F - Pulse Protocols

IMPORTANT: The value entered at the second digit is dependent on the first digit. If the value entered is

anything other than F, only the event code table needs to be chosen.

Event Code Table.

Second digit value:

0 - Event oriented table 8 - Zone oriented table

For pulse protocols, the data frequency and data rate should be defined in addition to the event code

table. Select the second digit value from the following table.

Event Code Table, Data Frequency and Data Rate Options for Pulse Protocols.

Second digit value:

Event Code Format Data Frequency Ack. Frequency Data Rate Value

1400Hz 10pps 0

1800Hz 20pps 1

2300Hz 10pps 2

Event Oriented 20pps 3

1400Hz 10pps 4

1900Hz 20pps 5

2300Hz 10pps 6

20pps 7

1400Hz 10pps 8

1800Hz 20pps 9

2300Hz 10pps A

20pps B

Zone Oriented 1400Hz 10pps C

1900Hz 20pps D

2300Hz 10pps E

20pps F

Pulse protocol examples: Ademco 4/2 Slow (10pps) - F8

Ademco 4/2 Fast (20pps) - F9

198 Protocol for telephone #1

199 Protocol for telephone #2

200 Protocol for telephone #3

201 Protocol for telephone #4

ADDRESSES 202 - 261: ZONE ORIENTED EVENT CODE TABLE

The following is a guide to programming event codes.

• 00 - No message is sent for this event.

• 0X (where X is any number between 1 and 9) - A 1 digit event code is sent for this event.

• XX - A 2 digit event code is sent for this event.

• X0 - For opening and closing events, the 0 is replaced with the user number. For other events both

digits are regarded as the event code.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 50 51

Komentáře k této Příručce

Žádné komentáře

Electronics Line 3208GLD Uživatelský manuál Strana 32

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Electronics Line 3208GLD